Agilent Technologies N2610A user manual Cable Testing with the FrameScope

3Cable Testing with the FrameScope 350

Setting Up an Autotest

Auto-Increment settings for the field highlighted, and the start and end values for the field highlighted.

2If you want the numbers for any field to increase automatically with each new label and test, highlight that field, then press Enable Auto-Incrementso that a checkmark appears, as in the figure above.

3To set the beginning number for a field to other than 1, highlight the category name, then press the Enter Start Value field. The onscreen keyboard opens.

4Press the backspace arrow to erase the number in the display, then press the number or letter keys to enter the new starting value. Press OK. The keyboard closes, and the new starting value appears in the Enter Start Value field.

68 Agilent FrameScope 350 User’s Manual