Agilent Technologies N2610A Fiber SmartProbe+, Accuracy whichever is greater Resolution Range

9Specifications

Fiber SmartProbe+

Fiber SmartProbe+

General	FiberSmartProbe+850nm, Fiber SmartProbe+ 1300nm
Size	2.4” x 1.6” x 0.8”
	(6.0 cm x 4.0 cm x 2.5 cm)
Optical Connectors	ST® x 2
Power Source	Draws power from WireScope 155 or
	DualRemote 155 via intelligent test port interface
Operating Temperature	0o to 40 o C
Storage Temperature	- 10o to 55 o C
Operating Humidity	10 to 90% non-condensing
Maximum Relative Humidity	80% for temperatures up to 31 C, decreasing
	linearly to 50% relative humidity at 40 C
Altitude	Up to 2000 meters

Fiber SmartProbe+ 1310nm, Fiber SmartProbe+ 1550nm

2.4” x 1.6” x 0.8”

(6.0 cm x 4.0 cm x 2.5 cm) SC x 2

Draws power from WireScope 155 or

DualRemote 155 via intelligent test port interface 0o to 40 o C

- 10o to 55 o C

10 to 90% non-condensing

80% for temperatures up to 31 C, decreasing linearly to 50% relative humidity at 40 C Up to 2000 meters

Detector

Receive Wavelengths

Measurement Accuracy

Dynamic Range

Detector Type

Transmitter

Power Output

Source Type

Center Wavelength

Spectral Bandwidth (RMS)

Stability

Stabilization Time

Cable Length

Accuracy (whichever is greater) Resolution

Distance1 Range

Propagation Delay

Accuracy (whichever is greater) Resolution

Range

FiberSmartProbe+850nm, Fiber SmartProbe+ 1300nm

850 and 1300nm +/-0.2dB @ -20dBm 0 to –40 dBm Germanium

FiberSmartProbe+850nm, Fiber SmartProbe+ 1300nm

(into 62.5/125 multimode fiber)

-10dBm (850nm), -15dBm (1300nm)

LED

N/A

N/A

FiberSmartProbe+850nm, Fiber SmartProbe+ 1300nm

+/- 4% or +/- 1.5 meters +/- 1.5 meters

0 – 4 km for 3.75 dB/km @ 850nm

0 – 10 km for 1.50 dB/km @ 1300nm

FiberSmartProbe+850nm, Fiber SmartProbe+ 1300nm

+/- 4% or +/- 6 nanoseconds +/- 6 nanoseconds

0 – 300 microseconds

Fiber SmartProbe+ 1310nm, Fiber SmartProbe+ 1550nm

1310nm and 1550nm +/-0.2dB @ -20dBm 0 to –40 dBm Germanium

Fiber SmartProbe+ 1310nm, Fiber SmartProbe+ 1550nm

(into 9/125 singlemode fiber) -3 dBm (1310nm and 1550nm)

Stabilized Class 1 LASER2 product in accordance with EN 60825.1 and FDA 21 CFR 1040.10. 1310nm +/- 30nm, 1550nm +/- 30nm

< 5nm

+/- 0.1dB, 1Hr. @ 25 C < 5 min.

Fiber SmartProbe+ 1310nm, Fiber SmartProbe+ 1550nm

+/- 4% or +/- 1.5 meters +/- 1.5 meters

0 – 50 km for 0.5dB/km @ 1310nm and 1550nm

Fiber SmartProbe+ 1310nm, Fiber SmartProbe+ 1550nm

+/- 4% or +/- 6 nanoseconds +/- 6 nanoseconds

0 – 300 microseconds

1Assumes double-ended configuration with –15dB maximum multimode link loss and 25dB maximum singlemode link loss. Divide by two for single-ended configuration.

2For safety the transmitter should never be viewed directly with the naked eye, a lens, or magnifying device.

KLASSE 1 LASER PRODUKT

∙ST is a registered trademark of AT&T

230 Agilent FrameScope 350 User’s Manual