Cable Testing in Expert Mode 5
The Expert Autotest Setup
Choosing the Labeling Format
The labeling format for Expert Mode is the same as that previously described in Chapter 3, “Cable Testing with the FrameScope 350”. See “Choosing the Labeling Format” on page 64 for more information.
Choosing the Cable Type
Cable from different manufacturers has different transmission characteristics. The FrameScope 350 compensates for those differences if you tell it what cable is used on the job. A grey cable spool icon indicates UTP cabling, a black cable spool icon indicates shielded cabling.
1On the Autotest Setup screen, press the cable spool icon, then press Edit. The Cable Setup screen displays.
2Select the cable manufacturer, and press Next. The Cable Database screen displays.
3Select a cable on the list, and press OK. The Autotest Setup screen displays, with the selected cable type next to the cable spool icon. If the cable is not in the cable database, see “Adding a new cable type” on page 72.
Agilent FrameScope 350 User’s Manual | 127 |
