Fiber Testing

4

Setting Up an Autotest

2Select either Overall Budget Method or Loss/Length Method, then press Next. Continue by completing the steps in the matching section that follows.

Overall Budget Method

Overall Budget Method configures a fixed loss limit value for each applicable wavelength. If a multimode SmartProbe is installed, you are asked to specify overall loss budgets for 850 nm and 1300 nm wavelengths. If a singlemode SmartProbe is installed, you are asked to specify overall loss budgets for 1310 nm and 1550 nm wavelengths.

When you select Overall Budget Method and press Next on the Loss Limit Setup screen, the screen changes to the following:

1To set the loss limit for a listed wavelength, press the wavelength field. The numeric keypad opens.

2Press the backspace arrow to erase the displayed value, then enter the new limit value. Press OK. The keypad closes.

Agilent FrameScope 350 User’s Manual

103

Page 111
Image 111
Agilent Technologies N2610A user manual Overall Budget Method