60 Agilent FrameScope350 User’s Manual
3Cable Testing with the FrameS cope35 0
Cable Testing Overview
3Switch on the FrameScope and DualRemote testers and
connect them to the cabling to be tested. See “Connecting to
the Network” on page12.
4Press the Cable tab on the FrameScope’s Main Menu screen
and then press a test button to begin the test.
You can run a preprogrammed autotest or configure your
own test parameter values before running the test.
•See “Choosing the Profile” on page 62.
•See “Opening th e Setup Menu” on page 62.
5View the results of the test and store test results as desired.
See “Saving Test Result s” on page 79.