LG Electronics LST-3510A DVD Additional Information, Last Condition Memory DVD, HDCD Playback

DVD Additional Information

Last Condition Memory DVD

This DVD/HDTV Receiver memorizes the last condition for the last disc played. Settings remain in memory even if you remove the disc from the DVD/HDTV Receiver or switch it off. If you load a disc that has had its settings memorized, the last stop position is automat- ically recalled.

otes

–Disc settings are stored in memory for use in the future.

–This DVD/HDTV Receiver does not memorize settings for a disc if you turn the DVD/HDTV Receiver off before starting playback.

Video Mode Setting DVD VCD2.0 VCD1.1

With certain discs, the playback picture may be flick- ering or Dot Crawl is shown on straight lines. This means Vertical interpolation or De-interlace is not perfectly matched with the disc. In this case, the picture quality may be improved by changing the video mode.

To change the video mode, press and hold DISPLAY about 3 seconds during disc playback. The new video mode number selected is displayed on the TV screen. Check whether the video quality has improved. If not, repeat the above procedure until pic- ture quality is improved.

Video mode sequence:

MODE 1 → MODE 2 → MODE 3 → MODE 4 → MODE 5.

If you turn off the power, the video mode will return to initial default state (MODE 1).

Detailed Description of each Video Mode

MODE 1: The source material of the DVD video (film material or video material) is determined from disc information.

MODE 2: Suitable for playing video based content with comparatively little motion.

MODE 3: Suitable for playing video based content with comparatively more motion.

MODE 4: Suitable for playing film based content or video based material recorded by the progressive scan method.

MODE 5: Determines the appropriate mode (film or video) during disc playback, and automatically selects the proper mode. Suitable for playing a disc comprised of film and video based content.

HDCD Playback

HDCD is a process that increases the fidelity of both specially encoded HDCD discs and standard Audio CDs. When an HDCD-encoded disc is playing, the special decoder is automatically activated and the HDCD Indicator lights. No user intervention is required. To enjoy the benefits of HDCD, your DVD/HDTV Receiver must be connected to your A/V receiver via the Analog Audio Outputs. However, if your A/V receiver or surround processor is equipped with built-in HDCD decoding and Digital Audio Output mode is set to stream/PCM on the Setup menu, you may elect to use either the Coaxial or Optical digital audio connections for HDCD playback.

52