LG Electronics LST-3510A owner manual Connections HD Monitor Component YPbPr Connections

Connections (Continued)

HD Monitor Component (YPbPr) Connections

Antenna

OR

Cable TV

Wall Jack Panel

HD Ready TV Connection Panel

ANTENNA	COMPONENT VIDEO INPUT			AUDIO INPUT		VIDEO
INPUT						INPUT
	Pr	Pb	Y	L	R

DVD/HDTV Receiver Connection Panel

1Connect the “Antenna/Cable” to the “ANT IN” jack on the DVD/HDTV Receiver using a coaxial RF cable.

ote

There might be some areas where the signal strength could be too high. If so, you may need to connect the antenna to an optional attenuator. Screw the attenuator onto the “ANT IN” jack. (Refer to page 12.)

2 Connect the “ANT LOOP OUT” jack on the DVD/HDTV Receiver to the “Antenna In” jack on your TV using a coaxial RF cable.

3 Connect the “COMPONENT OUT” jacks on the DVD/HDTV Receiver to the “COMPONENT IN” jacks of your TV using RCA-type cables. (The Output Selection must be set to YPbPr, refer to Setting the Display Format on

page 19)

4 Connect the L/R “AUDIO OUT” jacks on the DVD/HDTV Receiver to the L/R “AUDIO IN” jacks on your TV using RCA-type cables.

ote

The component out jacks are useable if 1080i, 720p, 480p, 480i, native, variable 1, variable 2, or variable 3 display format is selected.

14