Connection Panel Overview
ANT IN
Connect to HDTV signal source; external/internal antenna.
VIDEO OUT
Connect to a TV with video inputs.
COMPONENT VIDEO OUT
Connect to a TV with YPbPr inputs.
DIGITAL AUDIO OUT (COAXIAL)
Connect to digital (coaxial) audio equipment.
AUTHORIZED SERVICE ONLY
Is used only for authorized service purposes.
AC Power Cord
Plug into the power source.
Connect to a TV with DVI connector.
RGB OUT
Connect to a TV with RGB inputs.
DIGITAL AUDIO OUT (OPTICAL)
Connect to digital (optical) audio equipment.
Variable “volume” AUDIO OUT (Left/Right)
Connect to a TV, amplifier, receiver or stereo system.
You can adjust the volume of this audio out on DVD/HDTV Receiver.
Fixed “volume” AUDIO OUT (Left/Right)
Connect to a TV, amplifier, receiver or stereo system.
You can not adjust the volume of this audio out on DVD/HDTV Receiver.
Connect to a TV with
ANT LOOP OUT
RF output to TV’s “Antenna In” jack or other devices.
Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
INTRODUCTION
11
