Bernina Happy Voyager manual Round Type Hoops Select Class 1 , press SET

Happy Voyager

Positioning the Design in the Hoop/Creating Hoops 14

Round Type Hoops

Select Class 1 , press SET.

Press, SET to enter the Size area.

Change the number to represent the hoop size you wish to use for a Round Hoop.

Press, SET to save your change and ESC to exit the submenu.

Note: Remember the largest round hoop to fit the

HV machine is 210mm.

Rectangle Type Hoops

Select Class 2 , press SET.

Press, SET to enter the Size Y area.

Change the numbers to represent the height size you wish for the hoop. Press SET to accept.

Press, SET to enter the Size X area.

Change the numbers to represent the Length size you wish for the hoop. Press SET to accep

Note:

Equal values in the Y and X filed represent a square hoop, uneven values represent a rectan- gular hoop. Remember the largest Square hoop to fit the HV machine is Y = 320mm and X = 320mm

Select ESC to exit the submenu.

Once the hoop is created. Select the hoop and position the design in the hoop the same as de- scribed earlier.