Bertazzoni PM363I0X, PMMN...D7X dimensions Cleaning the appliance, Accessories or Agents

Cleaning the appliance:

Never use abrasive cleaners

Before cleaning the appliance it should be disconnected from the power supply.

Cleaning the work surface: periodically clean the burner heads, the enamelled steel pan supports and the burner caps using warm water.

Any spillage must always be removed as soon as possible using a rag.

If it become difficult to open or close a valve, do not force it, but immediately request the assistance of the technical service personnel.

Cleaning the enamelled parts: Enamelled parts should be cleaned frequently with soapy water. Never use abrasive powder. Do not leave acidic or alkaline substances on the enamelled parts (such as vinegar, lemon juice, salt, tomato sauce, etc.) and do not wash the enamelled parts while they are still hot.

Cleaning the stainless steel parts: Clean the parts with soapy water and dry them with a soft cloth. The shine is maintained by periodically using suitable products which can be found in the supermarket. Never use abrasive powders.

Cleaning the burner caps: Lift the burner caps from the burner heads and wash them in soapy water and dry thoroughly. Before replacement on the burner head ensure that the holes are not clogged.

Cleaning the glass ceramic: Warning: Do not use any kind of cleaner on the glass while the surface is hot, use only the razor blade scraper. The resulting fumes can be hazardous to your health. Heating the cleaner can chemically attack and damage the surface.

Clean the surface when it is completely cool with the following exception: remove dry sugar, sugar syrup, tomato products and milk immediately with the razor blade scraper.

Wipe off spatters with a clean, damp sponge or a paper towel. Rinse and dry. Use white vinegar if smudge remains; rinse.

Apply a small amount of the glass ceramic cooktop cleaner. When dry, buff surface with a clean paper towel or cloth.

TYPE OF STAIN	WHAT TO DO		ACCESSORIES or AGENTS
			EMPLOYED
Minor	Soak the area to be cleaned with soapy		Cleaning sponges & mild
			detergents
	water, then wipe it.
Accumulated burnt-on	Soak the area to be cleaned with warm		Cleaning sponges, mild
stains	soapy water. Use a special scraper for		detergents and cleaning agents
	vitroceramic glass to remove grease and		for vitroceramic glass
	food particles. Finish off with	a cleaning
	sponge, then wipe it clean.
	Apply warm white vinegar on the stain. Let		Cleaning cloth, white vinegar, or
Rings and traces of lime	it sit, then wipe off with a soft cloth.		diluted descaling agent.
scale	OR
	Use a commercial cleaner on affected
	area. Note that such cleaner may leave
	stains on stainless steel frame, thus
	protect exposed stainless steel.
Burnt-on stains following	- Apply special vitroceramic glass cleaner		Vitroceramic cleaning agents and
sugar spillage, melted			sponge.
aluminum or plastic.	on the surface, preferably	one which
	contains silicone (protective action).let it
	sit, then finish off with a cleaning sponge,
	then wipe it clean.
Allowable: Non-abrasive Paste - Ordinary Sponge or Special Sponge for Delicate Items
Not allowable: Abrasive-backed sponge - Powder

15