and no less than 2”( 5 cm) and no more than 8”(20,3 cm) from the left side (facing product). To connect gas between shut-off valve and regulator, use agency-approved, properly sized flexible or rigid pipe. Check all local code requirements.

PERFORMANCE CHECKLlST

All burners are tested before leaving the factory. There are no adjustments for the burners if connected according to the information on the rating plate. Check each burner for proper operations. Flames should be blue in all settings. If service is required, contact your dealer for the name of their authorized service agency. Gas conversions and initial installation are not the responsibility of the manufacturer.

The installer should carry out the following performance checks. Refer to instructions below.

1.Check surface burner ignition.

2.Check air shutter adjustment (only for oven and broiler burner)- sharp blue flame, no yellow tipping, sooting or flame lifting

3.Check low flame adjustment

4.Check broiler and oven ignition - all burner ports.

5.Check for gas leaks (odors) at all gas connections.

6.Check oven bake and convection bake function.

FINAL PREPARATION

1.Some stainless steel parts may have a plastic protective wrap which must be removed. The interior of the oven should be washed thoroughly with hot soapy water to remove film residues and any installation dust or debris before using it for food preparation, then rinsed and wiped dry. Solutions stronger than soap and water are rarely needed.

2.All stainless steel body parts should be wiped with hot, soapy water and with a liquid cleaner recommended for use with stainless steel If buildup occurs, do not use steel wool, abrasive cloths, cleaners, or powders! If it is necessary to scrape stainless steel to remove encrusted materials, soak with hot, wet cloths to loosen the material, then use a wood or nylon scraper. Do not use a metal knife, spatula, or any other metal tool to scrape

stainless steel! Scratches are almost impossible to remove.

NOTE: These installation instructions should remain with the unit for future reference. The electrical diagram is located in the backside or the appliance.

REPLACEMENT PARTS

Only authorized replacement parts may be used in performing service on the appliance. Replacement parts are available from factory authorized parts distributors.

Conversion to different types of gas

Before carrying out any maintenance work, disconnect the appliance from the gas and electric supply. For Natural Gas fit regulator assembly described in Fig.

Adaptation of the pressure regulator for use with different type of gas

The pressure regulator supplied with the appliance is a convertible type pressure regulator for use with Natural Gas at a nominal outlet pressure of 4” w.c. or LP gas at a nominal outlet pressure of 11” w.c. and it is pre-arranged from the factory to operate with one of these gas/pressure as indicated in the labels affixed on the appliance, package and Instruction booklet.

To convert the regulator for use with other types of gas follow these instructions:

1)Unscrew by hand the upper metal stopper of the regulator.

2)Unscrew by hand the white plastic piece screwed under the above mentioned metal stopper, afterward screw it again in opposite way under the metal stopper (for gas reference see the written “LP” and “NAT” with relative indicating arrows on the white piece).

3)Screw again by hand the metal stopper in the original position on the regulator.

Following these exact instructions the gas regulator is converted for use with the other gas/pressure.

9

Page 9
Image 9
Bertazzoni X366GGVX (X36 6 00 X), X365GGVX (X36 5 00 X) manual Performance CHECKLlST, Replacement Parts

X366GGVX (X36 6 00 X), X365GGVX (X36 5 00 X) specifications

Bertazzoni, a renowned name in the culinary world, has unveiled its impressive line of gas ranges, the X365GGVX and X366GGVX models. These ranges epitomize not just elegance but also offer an array of technological advancements aimed at enhancing the cooking experience for both gourmet chefs and home cooks alike.

The X365GGVX model boasts a powerful five-burner setup, providing a range of heating options that cater to diverse cooking needs. With a maximum output of 18,000 BTUs, the burners deliver exceptional heat, allowing for quick boiling, precise simmering, and everything in between. This model also features a dual-fuel configuration, combining the responsiveness of gas cooktops with the even baking temperatures provided by electric ovens, a perfect fusion for any culinary enthusiast.

On the other hand, the X366GGVX takes it a step further with its six-burner configuration. This professional-grade range not only elevates cooking capabilities but also makes multitasking in the kitchen more manageable. Designed with flexibility in mind, it includes a combination of burners ranging from high-output power burners to delicate simmer burners, allowing users to juggle multiple dishes with ease.

Both models feature Bertazzoni’s signature Italian design, characterized by a stainless-steel finish that is both sleek and durable. Their knob controls are ergonomically designed for ease of use, ensuring that adjusting the heat is always intuitive. The ranges also come equipped with high-quality porcelain-coated cast iron grates, which provide exceptional stability for pots and pans.

One of the standout technologies in these models is the Precision temperature control, which ensures that both the burners and ovens maintain optimal cooking temperatures. This technology prevents temperature fluctuations during cooking, making it easier to achieve consistent results every time.

Safety features are also paramount in the X36 series. Both models incorporate advanced flame failure devices that automatically shut off the gas supply if a flame goes out, providing peace of mind during cooking.

In summary, the Bertazzoni X365GGVX and X366GGVX gas ranges combine cutting-edge technology, robust performance, and stunning design. They are tailored for culinary enthusiasts who demand precision, versatility, and effortless style in their kitchen. As options for modern cooking solutions, these models are certainly worth considering for anyone looking to elevate their culinary experience.