Advanced – PSTN Environment Adjustment

VoIP/(802.11g) Broadband Firewall Router

Click the Edit to add or remove the responses code. To be sure the code is separated by a comma(,).

For more information about SIP responses codes, please check Note: ONHOOK means hung up. to link to http://voip-info.org/wiki/view/sip+response+codes where you can get to know the meaning of each error code.

Advanced – PSTN Environment Adjustment

PSTN Environment Adjustment options will help you to adjust the onhook and offhook voltage detection values for your environment. You should use these if the default values are incorrect and result in PSTN calls not being detected properly, e.g. calls being terminated within 5 seconds of being answered. The actual levels are determined by your environment including the number and type of telephones used.

Note: ONHOOK means hung up.

To take your phone OFFHOOK, lift the receiver then press Hook/Flash until you hear your normal PSTN dialtone, not your VoIP dialtone. Wait several seconds and then press Check Level.

You should check the OFFHOOK value for each telephone you have connected to this device. Set the OFFHOOK voltage to the lowest setting registered for all your telephones, e.g. if your telephones return values of 4, 5 and 7 then you should set your OFFHOOK voltage to 4.

Note: The detected values will not automatically be set by the Check Level function; you must enter the lowest level detected after testing all your telephones.

65

Chapter 4: Configuration

Page 66
Image 66
Billion Electric Company 6404VP, 6404VGP user manual Advanced - PSTN Environment Adjustment, Note ONHOOK means hung up