Binatone SC2050 manual Charge light comes on

Installation and set-up

5 Charge the battery pack for 15 hours before you use the cordless handset

Before you use the handset for the first time, it is important that you charge the batteries fully. You will hear a ‘beep’ when the handset is correctly positioned on the charging cradle.

Leave the handset on the charger pod for 15 hours. To keep the batteries charged, whenever you don’t need to use the cordless handset (such as overnight, or when you go out), leave it on the charger pod.

The CHARGE light comes on

Note:

Battery life depends on device usage. Therefore, it is recommended that you read the following.

lWhen the batteries are low, the cordless handset will display the corresponding icon . Place the handset back on the charger pod: the battery icon will start scrolling.

lUse only original batteries and charge them only on the charger pod.

lInsert the battery pack properly as previously described.

lDo not dispose of the batteries in fire: this may cause an explosion.

lDo not expose the batteries to temperatures lower than -20 °C or higher than 60 °C; charge and use the batteries only in locations where the temperature is between 0 °C and 40 °C.

lRemove the battery pack from the compartment if the cordless handset is not used for a long period of time.

Binatone Help Line: 0845 345 9677 11