Binatone SC2050 manual Transferring calls

To page the cordless

handset »

»

Transferring calls

This is useful if you can’t find your cordless handset.

When the base telephone is idle (not on a call), press and release the PAGE button

èThe cordless handset rings with a special tone. If you have more than one cordless handset registered to your base, they will all ring.

To stop the cordless handset ringing:

On the cordless handset, press any button or numbered key

You’ll need to do this on all ringing handsets. If you don’t press a button, the ringing will carry on for 30 seconds.

To make an intercom call 1

From base to cordless handset:

When the base telephone is idle, press and hold the page button until you hear a beep and a background tone for 5 seconds.

2	Within the 5 seconds, press the handset
	number, e.g. 1 for Handset 1.

èThe handset will be paged.

3		On the cordless handset, press the TALK or
	or	SPEAKERPHONE button to connect to the base
		in an intercom call.
		From cordless handset to base:
1		When the cordless handset is idle, press the
		INTERCOM button so the display shows HS-.
2		Within the 5 seconds, press digit 0 (for the
		base).

èThe base will be paged.

3On the base, pick up the handset or press the

SPEAKERPHONE button to connect to the cordless handset in an intercom call.

Binatone Help Line: 0845 345 9677 19