Operations
Using the tools
Attach desired tool to hose for above floor cleaning surfaces or hard to reach areas.
1.Remove Hose: With vacuum in upright posi- tion, remove hose end from the suction inlet near the bottom of the vacuum by the wheel. Do not remove “tabbed” end of hose con- nected to the clear tank.
2.Attach tools by firmly pushing onto vacuum hose or extension wand.
2a. Dusting brush: Use brush side to dust furniture, blinds, lamps, shelves, and baseboards. 30C7 model only.
2b. Crevice Tool: Use in tight narrow spaces
2c. Extension Wand: Use with desired attachment for longer reach.
2d. TurboBrush® Tool: Use rotation brush action for small flat areas such as stairs,and furniture. Press gently down and pull towards you in raking motion, too much pressure will cause brush to stop rotating.
NOTE: Model 30C7T comes with the Pet TurboBrush® Tool and fol- lows same operation instructions.
2e. Pet Contour Tool® (Included with 30C7T only): Use to reach into corners and edges on stairs as well as armrests and other curved surfaces. The tool can be flipped to use in any direction.
2
a.
b.
c.
d.
e.
CAUTION:
To avoid personal injury and to prevent the cleaner from falling when clean- ing stairs, always place it at the bottom of the stairs.
8 w w w . b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |
