• Place the steam mop on the resting mat.
• Plug the steam mop electric cord into the outlet.
• Press the ON/OFF button (1). It takes approximately 15 seconds for the steam mop to heat up.
• Rotate the SmartSelectTM dial (2) until the required setting is reached.
• Pulling the handle (4) back will activate the steam pump. After a few seconds steam will start to come out of the steam head.
NOTICE: If the system has been run dry it may take up to 30 seconds to prime the system on first use.
• It takes a few seconds for steam to enter the cleaning pad. The steam mop will now glide easily over the surface to be sanitized/cleaned.
• Push and pull the steam mop slowly across the floor to thoroughly steam clean each section. NOTICE: During use you may turn off the steam pump by returning the handle to the upright position, this convenient feature will allow you to place the steam mop on the resting mat for a short time so that you may move items or furniture, then continue cleaning without the need to switch the appliance off.
• When you have finished using the steam mop, return the handle (4) to the upright position and turn it ‘OFF’, place it on the resting mat (7) and wait until the steam mop cools down. (approximately five minutes)
After use - Fig. I
• Return the handle (4) to the upright position and turn the steam mop ‘OFF’.
• Place the steam mop on the resting mat (7) and wait until the steam mop cools down. | ||
• | (approximately five minutes) | I |
Unplug the steam mop from the wall outlet. | ||
• | Empty the water tank (3). |
|
• | Remove the cleaning pad (6) and wash it so that it is |
|
| ready for the next use. (Take care to follow the wash care |
|
• | instructions printed on the cleaning pad). |
|
Wrap the electric cord around the cord hooks (8 & 9). |
| |
NOTICE: The top cord hook rotates to easily release the |
| |
cord for the next use. |
| |
• Place steam mop on the resting mat (7) for storage. |
| |
NOTICE: With the handle (4) in the upright position, the |
| |
cord neatly wrapped around the cord hooks (8 & 9), your |
| |
steam mop will stand on its own for storage. Alternatively there is a hanging bracket built | ||
into the hand grip which will allow your steam mop to be hung from a suitable hook on the | ||
wall. Always ensure that your wall hook is capable of supporting the weight of the steam | ||
mop safely. |
| |
Maintenance and cleaning
Your Black & Decker corded appliance has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper appliance care and regular cleaning.
WARNING: Before performing any maintenance or cleaning on corded appliances switch off and unplug the appliance.
•Clean your appliance using a soft damp cloth. Never let any liquid get inside the appliance; never immerse any part of the appliance into a liquid. IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts.
•For stubborn marks you can use a mild solution of soap and water to dampen your cloth.
Care of the cleaning pads
NOTICE: Follow the cleaning instructions printed on the label of your cleaning pad. Wash care instructions - Machine wash warm 140°F (60°C) - No bleach - No fabric softener - Air dry only - Allow to dry fully before
7
