Black & Decker FS210LS instruction manual Assembling Blade Raising and Lowering Handwheel

ASSEMBLING BLADE

RAISING AND LOWERING

HANDWHEEL

1.Insert special screw (C) through handle (B) Fig.10 and assembly handle to handwheel (A) by threading screw clockwise into handwheel. Then push on handle cover

(D).

2.Fig. 11, illustrates the handle (B) assembled to handwheel (A).

3.Assemble handwheel (A) Fig. 12, to shaft (B) making sure the flat on inside of handwheel lines up with flat on shaft.

4.Fasten handwheel (A) Fig. 13, to shaft (B) Fig. 12, using a M6x1x12mm flat head screw (C) Fig. 13.

A

B

C

D

Fig. 10

Fig. 11

A

B

Fig. 12

C

A

Fig. 13

12