Black & Decker FS210LS Unpacking and Cleaning, Assembly Tools Required, Table SAW Parts

UNPACKING AND CLEANING

Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.

NOTICE: THE PHOTO ON THE MANUAL COVER ILLUSTRATES THE CURRENT PRODUCTION MODEL. ALL OTHER ILLUSTRATIONS CONTAINED IN THE MANUAL ARE REPRESENTATIVE ONLY AND MAY NOT DEPICT THE ACTUAL COLOR, LABELING OR ACCESSORIES AND ARE INTENDED TO ILLUSTRATE TECHNIQUE ONLY.

ASSEMBLY

ASSEMBLY TOOLS REQUIRED

1). Adjustable wrench

2.) 13mm wrench for stand bolts.

3.) 10mm wrench for splitter assembly bolts, rear supports assembly and extension wings assembly.

4.) Slotted screwdriver.

6.) Phillips screwdriver.

5.) Straight edge and/or framing square for adjustments.

TABLE SAW PARTS

1- Saw

2- Left Extension Wing

3- 1/4 in.-20X1 in.Hex Head Screw for Left Extension Wing (3)

4- 1/4 in. Flat Washer for Left Extension Wing (6)

5- 1/4 in. Lockwasher for Left Extension Wing (3)

6- 1/4 in.-20 Hex Nut for Left Extension Wing (3)

7- Right Extension Wing

8- 1/4 in.-20X5/8 in.Hex Head Screw for Right Extension Wing (3)

9- 1/4 in. Flat Washer for Right Extension Wing (3)

10- 1/4 in. Lockwasher for Right Extension Wing (3)

ASSEMBLY TIME ESTIMATE

2 Hours

4	5 6	10	9
			8

3

2 1 7

Fig. 1

7