A.Water outlet
B/B1. Water inlet connector with filter
C.High pressure turbo wand
D.Adjustable fan wand
E/E1/E2 Gun with safety catch/hose assembly
F.Power supply cord with GFCI
G.Detergent applicator
H.On/off switch
I.Garden hose Quick Connect
Figure 1 - Insert the fan wand (D) into the gun wand (E) by pushing and rotating until the two parts are locked as shown in Figure 1.
1 |
Figure 2 - Connect the high pressure hose (E2) to the water outlet (A) on the cleaner by first inserting the brass end of the hose into the threaded brass outlet, then snugly threading on the coupling.
2
High pressure hose
Figure 3 - Connect the threaded end of the Quick Connect adapter (I) to your garden hose as shown in Fig. 3.
3
Garden hose
Figure 4 - With the quick connect adapter (I) attached to your garden hose, pull back on the top section and push onto the water inlet connector (B) of the pressure washer, then release.
4
Figure 5 - Connect garden hose to the cold water source and turn water on full.
The intake water temperature must NOT exceed 50°C (122°F). The water supply pressure must NOT exceed 10 bar (145psi).
4
