Black & Decker T1000 manual Figure A

■Do not install the Toaster directly in front of an electrical outlet, but be sure it is mounted within reach of an electrical outlet.

■The Toaster is designed to be mounted directly next to any other Spacemaker* OptimaTM product, with a clearance of at least 1” between the two products. If it is not mounted next to any other Spacemaker* OptimaTM product, maintain at least a 5” clearance on all sides including the back.

NOTE: If you have Flush Bottom cabinets—a flat level surface where the cabinet doors come to the bottom of the cabinet front—(See Illustration 1A page 6) please take note that the Metal Lip of the Toaster should not be placed anywhere under the hinge area of two cabinet doors.

If you are mounting the Horizontal Toaster directly next to another Spacemaker* OptimaTM product that is already mounted:

1.Place the Mounting Template along the side of the already-mounted Spacemaker* OptimaTM pro- duct that your Horizontal Toaster will hang next to.

2.Using the Mounting Template edge as a guide, draw a line on the underside of the cabinet. (Figure A) This will be the line to use to mark the edge of the Horizontal Toaster’s location.

NOTE: To help determine mounting location, see page 24 for the lengths of all the Spacemaker* OptimaTM products.

Figure A *Trademark of General Electric Company, U.S.A.

5