Black & Decker T1000 manual Installing Your Horizontal Toaster

Flush bottom-1A

Overhang Bottom-1B

Figure B

INSTALLING YOUR HORIZONTAL TOASTER

Tools you will need for installation:

•Drill and 1/4” drill bit

•Phillips screwdriver

•Hammer/Nail to start a drill hole

•Adhesive tape

•Eye Protection Goggles

•Newspaper to cover

counter tops (optional)

First, determine if your cabinet has a flush bottom or overhang bottom. (See Illustration 1A & 1B). If your cabinet has a flush bottom — flat, level surface — follow the mounting instructions below. If your cabinet has an overhang — a lip extending below the bottom of the cabinet shelf — turn to page 9 for mounting instructions.

MOUNTING INSTRUCTIONS FOR CABINET WITH FLUSH BOTTOM

1.Empty your cabinet of its contents before starting to drill.

Clean the underside of the cabinet to remove any grease or other residue.

2.With the doors of the cabinet open, place the front of the Mounting Template even with the front of the cabinet. (Figure B) Tape securely in place.

3.Mark the four drill holes through the Template onto the cabinet bottom with a pencil and

6