Figure F
Figure G
Figure H
8.Press the Bracket inward and forward toward the front of the cabinet until it stops. Tighten the screw/nut assem- bly with a screwdriver until the Bracket just touches the bottom of the cabinet. (Figure G) The Bracket should move freely front to rear in the slot to fine tune the fit of the Toaster to the cabinet front. Repeat Steps 7 and 8 for the other Bracket.
9.Hold the Toaster in front of you and push it forward into the slots on the Mounting Brackets until it locks into place. The Metal Lip on the top of the Toaster must rest against the cabinet front. (See Figure H) The front of the Toaster will extend 11⁄2" beyond the front of the cabinet.
10.Drape the Cord toward an electrical outlet and use the Cord Hook to hold it out of the way. Peel the paper off the adhesive back of the Cord Hook. Place the Cord Hook at the back edge of the cabinet (on or next to the wall) over the outlet to be used.
NOTE: For safety, NEVER USE TACKS THROUGH OR AGAINST THE CORD TO HOLD IT.
8
