REMOTE UNIT CONFIGURATION & OPERATION
LF too low | LF too high |
| HF too low | HF too high |
Figure 11 | Problems with smearing and sharpness requiring LF and | |
| HF adjustment |
|
6.Identify the ‘slowest’ color – the colored line furthest to the right. Delay the signals of the two other colors using the following commands:
Delay Command | Key Sequence |
|
|
Increase RED Delay (move right) | <R> + <Right Arrow> |
Decrease RED Delay (move left) | <R> + <Left Arrow> |
|
|
Increase GREEN Delay (move right) | <G> + <Right Arrow> |
Decrease GREEN Delay (move left) | <G> + <Left Arrow> |
|
|
Increase BLUE Delay (move right) | <B> + <Right Arrow> |
Decrease BLUE Delay (move left) | <B> + <Left Arrow> |
|
|
Use the Quick Skew feature to determine which color requires delaying or to quickly set the delay on a color back to zero. Applying Quick Skew to a color toggles its delay between zero and 19nS (a typically required value).
Quick Skew Command | Key Sequence |
|
|
Toggle RED Delay | <Left Control> + <R> |
|
|
Toggle GREEN Delay | <Left Control> + <G> |
|
|
Toggle BLUE Delay | <Left Control> + <B> |
|
|
33
