Black Box LBPS301A, LBPS304A Front Panel, Configuration, Page, LED Indicators, 2. LED indicators

Chapter 3: Configuration

3.1.2 Front Panel

LED Indicators

The LED indicators give you instant feedback on the status of the Hardened Ethernet Extender.

Table 3-2. LED indicators

Power LEDs	State	Indication
Power 1	Steady	Power on
Power 2
	Off	Power off
Power 3
Ethernet LEDs
	Steady	Powered device (PD) is connected
PoE
	Off	Powered device (PD) is disconnected.
	Steady	Valid network connection established.
	Flashing	Transmitting or receiving data. ACT stands for
Link/ACT (Green)		ACTIVITY.
	Off	Valid network connection not established or not
		transmitting/receiving data.
	Steady	Valid port connection at 100 Mbps.
Speed (Yellow)
	Off	Valid port connection at 10 Mbps.
Ethernet Extender LEDs
Remote	Steady	The device operates in remote mode.
Local	Steady	The device operates in local mode.
Error	Steady	Error occurred.
Link	Steady	A valid connection established.

	Table 3-3. Speed/distance.
Speed	Distance
1 Mbps	6232 ft. (1900 m)
3 Mbps	5904 ft. (1800 m)
5 Mbps	5249 ft. (1600 m)
10 Mbps	4593 ft. (1400 m)
15 Mbps	3936 ft. (1200 m)
20 Mbps	3280 ft. (1000 m)
25 Mbps	2624 ft. (800 m)
30 Mbps	2296 ft. (700 m)
40 Mbps	1968 ft. (600 m)
50 Mbps	984 ft. (300 m)

Page 16 724-746-5500 blackbox.com