12
PQ-8P, PQ-8S
2.1 Description of Front Panels
C
ONFIGURATION
S
WITCHES
The configuration switches are used
to set the twinax address, output
protocol, and to perform the
available test and diagnostic
functions. While the PQ-8P comes
with only one bank of switches, the
PQ-8S comes with two banks of eight
switches. The left bank is labeled
SW1; the right bank is labeled SW2.
LED
S
The green LED lights indicate the
following:
• Host Line Sync —Communication
lines between the host and the
PQ-8 are established.
• Printer Online—The printer is
ready to receive data.
• Data Out—The PQ-8 is currently
sending data to the printer.
• Data From Host—The PQ-8 is
currently processing data
received from the twinax host.
• Power—The PQ-8 is powered on.
• On/Off Switch—The On/Off
switch is used to power on or
power off the PQ-8. Use this
switch when asked to cycle
power.
2.2 About This User’s Guide
This user’s guide covers both the
PQ-8P and the PQ-8S.