Black Box servswitch cx uno ip, kv1081a manual What to do if the Admin password has been forgotten

What to do if the ADMIN password has been forgotten

If the ADMIN password becomes mislaid or forgotten, you will not be able to access the ServSwitch CX Uno IP to add or edit users and computer names. This situation may be resolved by performing a complete reset to return the ServSwitch CX Uno IP.

IMPORTANT: A complete reset erases all the user names and computer names that you have setup.

To clear a password (and restore factory default settings)

1Remove power from the ServSwitch CX Uno IP unit.

®



2Press and hold the reset button on the front panel (requires paper clip or similar).

3Apply power and after a couple of seconds release the reset button. The Maintenance menu will be displayed 

4Highlight ‘Reset Configuration’ and

press . The Reset Config warning will be displayed 

5Highlight ‘Reset’ and press . All settings will be returned to their factory defaults and the previous Maintenance menu will be re-displayed.

6Remove power from the unit and then re-apply it.

7You now need to go through the initial configuration procedure and re- instate all of the required settings.

 

   



 

 

   

  

         

                

    



  



23