Black Box servswitch cx uno ip, kv1081a, kv1161a Serial Configuration, Options Port, Options Baud

Serial Configuration

This page allows you to configure the OPTIONS serial port located at the rear of the ServSwitch CX Uno IP.

To get here

1From a local keyboard, log on as the ‘admin’ user.

2Press (hotkeys can change).

3Press to show the Main Menu.

4Select ‘Configuration’ and press .

5Select ‘Serial Configuration’ & press .

Options Port

Settings: Power Control, Sync Units

  

      



®

 

Determines whether the RS232 serial OPTIONS port at the rear of the unit will be used for connection to power control switches or to synchronize the operation of two ServSwitch CX Uno IP units.

Options Baud

Settings: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200

This option determines the speed of the RS232 serial OPTIONS port. The other communication settings are fixed as: No parity, 8 bit word, 1 stop bit.

Note: When ‘Options Port’ is set to ‘Sync Units’, the baud rate will be automatically changed to 19200.

 



59