Black Box kv1081a Power in connection, To connect the power supply, Exceeds 40 degrees Centigrade

Power in connection

The ServSwitch CX Uno IP unit is supplied with a standard 5V power adapter. There is no on/off switch on the unit, so operation begins as soon as a power adapter is connected.

To connect the power supply

LOCAL GLOBAL

USER USER

IP

POWER	®
IN	724-746-5500

SAM

COMPUTER POWER

SYSTEM SWITCH

®

2 Connect the IEC connector of the supplied country-specific power lead to the socket of the power adapter.



1Attach the output lead from the power adapter to the 5V socket on the rear panel of the ServSwitch CX Uno IP.

		ServSwitch CX Uno IP
		rear panel
		OPTION
		S
5
V
2.	A	16
0

12

output lead from

power adapter

	
3 Connect the power lead to a nearby main supply socket.
Note: Both the ServSwitch CX Uno IP and its power supply generate heat when	
in operation and will become warm to the touch. Do not enclose them or place
them locations where air cannot circulate to cool the equipment. Do not operate
the equipment in ambient temperatures exceeding 40 degrees Centigrade. Do
not place the products in contact with equipment whose surface temperature
exceeds 40 degrees Centigrade.
	 



12