10
®
Global user (IP network port)
The ServSwitch CX Uno IP models provide an
autosensing Ethernet IP port that can operate
at 10 or 100Mbps, according to the network
speed. The ServSwitch CX Uno IP models are
designed to reside quite easily at any part of
your network:
• They can be placed within the local
network, behind any firewall/router
connections to the Internet, or
• They can be placed externally to the local
network, on a separate sub-network or with an open Internet connection.
Wherever in the network an ServSwitch CX Uno IP is situated, you will need to
determine certain configuration issues such as address allocation and/or firewall
adjustment to allow correct operation. Please refer to Networking issues within
the Configuration chapter for more details.
IMPORTANT: When an ServSwitch CX Uno IP is accessible from the public Internet
or dial up connection, you must ensure that sufficient security measures are
employed.
To connect the Global user (IP network) port
1 Depending upon where in the network the ServSwitch CX Uno IP is being
connected, run a category 5, 5e or 6 link cable from the appropriate hub or
router to the ServSwitch CX Uno IP unit.
2 Connect the plug of the link cable into the IP port on the front panel of the
ServSwitch CX Uno IP unit.
3 Configure the network settings as appropriate to the position of the
ServSwitch CX Uno IP within the network - see Networking issues for
details.
GLOBAL
USER
IP
LOCAL
USER
POWER
IN
POWER
SWITCH
COMPUTER
SYSTEM
SAM
®
724-746-5500
®
IP network link
ServSwitch CX Uno IP
front panel
BLACKBOX
CX Uno IP