Black Box SW591C, SW590A-R2 manual Connecting and Powering Up the COS-II

3.9. Connecting and Powering Up the COS-II

Once you have configured the internal switches and jumpers, you can connect your devices and the wallmounted power jack to the COS-II. Before you begin, you might wish to check the settings of all the DIP switches again, to make sure you have set them correctly.

To prepare the COS-II:

1.Make sure that SWA 8 is set to OFF, that is, to normal operation.

2.Insert the 4-pin power-supply plug in the power- supply socket (at J1) on the COS-II circuit board.

CHAPTER 3: Installation

3.Slide the cover back onto the base of the COS-II, and secure it with the screws.

4.Connect the device cables to the ports.

5.Plug the wallmounted power supply into a standard AC line.

Before you use the COS-II, you might wish to familiarize yourself with the indicators, reset button, and self-tests available. Chapter 4 explains these features.

17