
Contents
| Contents |
|
Chapter | Page | |
1 Specifications | 4 | |
2 Introduction | 5 | |
3 Installation | 6 | |
3.1 | Introduction | 6 |
3.2 | Setting the DIP Switches | 6 |
3.3 Functions and Arrangements of the Switch Banks | 7 | |
3.4 Bank Assignments | 8 | |
3.5 | Configuring Ports with the Individual Port Switch Banks | 8 |
3.6 | Setting Global Characteristics with the System Switch Banks | 8 |
| 3.6.1 Functions fo Switch Bank SWF | 8 |
| 3.6.2 Setting the Arming Character with SWG | 10 |
3.7 | Setting Global Characteristics with the Individual Banks | 16 |
3.8 Configuring Ports for DTE or DCE | 16 | |
3.9 Connecting and | 17 | |
4 Operation |
| |
4.1 | Introduction | 18 |
4.2 | Creating a Link | 18 |
4.3 | Signaling a Lock | 18 |
4.4 Text Mode | 18 | |
4.5 | Graphics Mode | 18 |
4.6 | Indicators | 19 |
4.7 | 19 | |
4.8 | 19 | |
Quick Reference Guide | 21 |
If you’re already familiar with the Code Operated Switch II, and you just need to know how to configure the DIP switches, you can turn to the Quick Reference Guide on page 21.
This product is CE certified. This certificate indicates that the product is suitable for use in commercial and light industrial environments as defined in EN
NOTE
Shielded interface cables must be used with this product. Call Technical Support at
3