Blaupunkt RCM 104 A Changing the memory bank FM, Storing stations, Recalling stored stations

Models: RCM 104 A

1 27
Download 27 pages 16.02 Kb
Page 12
Image 12
Press the PS button once again.
The radio will continue to play the cur- rently scanned station.
Briefly press PS.
All of the stations in that waveband will be scanned one after another.

Changing the memory bank (FM)

You can shift between the memory banks I, II, and “T” to store and to recall preset stations. The selected memory bank is indicated in the display.

Press FMT until the desired memory bank lights up in the display (press re- peatedly if necessary).

Storing stations

Using the preset buttons 1, 2, 3, 4, 5, 6 you can store six stations on each FM memory bank (I, II, T).

In the MW/LW range you can store six stati- ons each.

• Select the waveband with the FMT or

M•L button.

Note:

Should you tune into a station which has already been stored, the corresponding pre- set button and the memory bank will start flashing in the display for a short while, if you have selected another memory bank.

Storing the strongest stations automatically with Travelstore

You can use the Travelstore memory bank to automatically store the six strongest FM sta- tions sorted on the preset buttons according to their signal strength. This feature is espe- cially useful when travelling, because it will always give you the most powerful stations at a finger tip as you pass through the various reception areas.

Press FMT for approximately 2 sec.

Recalling stored stations

You can recall any stored station by pressing the corresponding preset button.

Press FMT or M•L to select the wave- band. For FM, also choose the corre- sponding memory bank by pressing FMT until the desired bank is indicated in the display.

Briefly press the corresponding preset button.

Preset scanning

You can have all of the stations stored in one waveband scanned by using the Preset Scan function. Choose the desired SCANTIME in the DSC menu.

DEUTSCH

ENGLISH

NEDERLAND ITALIANO FRANÇAIS

• Select a station with the rocker switch

(either automatically / or manually

<< >>).

• Press the desired preset button and

hold it down. The radio will be muted

and resumes play after approximately 2

seconds.

Now the station has been stored. The activa- ted preset button is indicated in the display.

The radio will search for the six most powerful

 

FM stations and store them on the “T” memo-

 

ry bank (Travelstore). When this process has

Depending on which memory bank has been

been completed, the radio will tune in the

activated for FM, all of the stations in either I,

strongest station.

II or the Travelstore level will be scanned. If

FM stations can also be stored manually on

a preset is not in use, it is skipped.

the Travelstore memory bank (see “Storing

To stop the scan:

stations“).

PORTUGUES ESPAGÑOL SVENSKA

35

Page 12
Image 12
Blaupunkt RCM 104 A Changing the memory bank FM, Storing stations, Recalling stored stations, Preset scanning