Blaupunkt RCM 104 A Tim/Ta, 3, 4, 5, 6 preset buttons, Scan, ? BC Dolby BC NR

the corresponding slot above the Key- Card tongue.

Read also the information given in the “KeyCard” chapter.

9AF button (alternative frequency) du- ring RDS operation

When “AF” lights up in the display, the system will automatically seek a fre- quency offering better reception of the same RDS program.

“AF” on/off: Press theAF button briefly. When pressing the AF button for about 2 seconds, the display will show REG- ON or REG-OFF (see also chapter REG - Regional).

:PTY button (Program Type) Activates the PTY mode. In the PTY mode, the station buttons become pro- gram buttons, for programs such as

NEWS, SPORT, POP MUSIC, SCIENCE, etc.

;TIM/TA

TIM (TraffIc Memo)

To play all the stored traffic announce- ments:

Press TIM briefly.

To activate/deactivate the priority for traffic announcements:

Press TIM for approximately 2 seconds. TA (Traffic Announcement)

If TA lights up in the display, the system will only play traffic stations.

TA on/off: Press the TIM button for approximately 2 seconds.

Note the warning under “Traffic Memo (TIM)”.

<1, 2, 3, 4, 5, 6 - preset buttons

You can store 6 stations on each FM memory bank (I, II, and “T“) and another 6 stations on MW and LW each.

To store a station: Press button during radio operation and hold down until the radio comes on again.

To recall a station: Select the wave- band. On FM, select the desired memo- ry bank and press the corresponding preset button.

=PS

Preset Scan

Press button briefly to scan the stations stored on the preset buttons.

SCAN	DEUTSCH
For briefly playing all receivable stati-
ons or the titles during tape or changer
operation (option).	ENGLISH
To start/stop Scan: Press PS for ap-
prox. 2 seconds.

The scan time can also be altered (see

chapter “DSC programming” - SCANTI-	FRANÇAIS
ME).
> RM (Radio Monitor)
	ITALIANO
Press this button to listen to the radio
while fast forwarding or fast rewinding
the tape.
During tape operation:
	NEDERLAND
To switch RM on/off: Press RM.
When this function is activated, the
display shows “RM”.
The radio is played during fast tape run.
This set allows you to play back tapes	SVENSKA
? B•C – Dolby B•C NR
that have been recorded with Dolby-B
NR, Dolby-C NR or without Dolby noise	ESPAGÑOL
reduction.
Press B•C to adjust to the type of Dolby
NR in which the tape was recorded or
to disengage Dolby NR. When Dolby is	PORTUGUES
active, the corresponding indicator “B”

or “C” will light up.

29