![](/images/new-backgrounds/1297306/29730627x1.webp)
b)Using the << >> rocker switch
If PTY is switched on, you can select a program type via the << >> rocker switch.
•Press << or >>. The PTY selected last will be displayed for three se- conds.
•During this period choose the desi- red program type with << (back- wards) or >> (forwards direction).
•Press << or >> as many times as required.
Tuning into a station with PTY
You may let the system find you the stations offering the adjusted program type using the seek tuning rocker switch or the PS (SCAN) button.
Precondition: “PTY” must be illuminated on the display.
•Press <<>> or PS.
Seek tuning will stop at the first station offe- ring the desired PTY.
If you have pressed PS (SCAN), the stations received will be scanned once until you switch SCAN off again (press PS once again).
PTY priority
When PTY is activated, the system will con- stantly search for the corresponding program type within the station network of the recei- ved program.
If you listen to NDR2, for example, the set will also search through the other NDR programs to find out whether there is a program offering the desired PTY.
During radio operation, as soon as such a program begins the unit will switch over to this program for the duration of the corre- sponding broadcast.
During tape or CD operation, the system will release a BEEP and display the program type in order to let you know that a program offering the desired PTY has started.
•If you wish to listen to this program, press SRC to switch to radio operation.
Note:
As mentioned before, the PTY function is presently not available with all RDS stations.
Station naming | DEUTSCH |
|
Using the ST NAME item of the DSC menu |
| ||
you can enter a name with a maximum of 8 | ENGLISH | ||
banks I and II. | |||
digits for all stored frequencies of memory |
| ||
Most of the FM stations are RDS stations, the |
| ||
names of which will be shown in the display. | FRANÇAIS | ||
The displayed RDS name has priority over all | |||
| |||
entries specified by the user. If you have |
| ||
named an RDS station, this name will only be |
| ||
shown briefly and be replaced by the RDS |
| ||
name afterwards. | ITALIANO | ||
name | |||
For this reason we recommend that you only |
| ||
their frequency but not the name. |
| ||
All | NEDERLAND | ||
station name at the factory. | |||
| |||
To start your entry: |
| ||
• | Choose a station, | SVENSKA | |
• | select item “ST NAME” with rocker | ||
• | press DSC, |
| |
| switch / and |
| |
• | press | ESPAGÑOL | |
• | Now select a character with rocker | ||
The first position is flashing. |
| ||
| switch / . |
|
You have the choice between the capital letters
PORTUGUES
37