INFRARED CHEESE MELTER | INSTALLATION |
STEP 2A: MOUNT ON FLUE RISER OF RANGE
The Infrared Cheese Melter mounts over a range. A special flue riser is shipped with the Cheese Melter and range. Depending on the shipping requirements, the Cheese Melter,
1.Attach the flue riser to the rear of the range using the installation procedure included in the range manual, but do not attach the wall shield (the back of the flue riser) yet.
2.Lift the Cheese Melter (using two people is recommended) and hook the Cheese
3.Secure the bottom of the Cheese Melter to the flue riser with the four ¼”
4.If the optional internal piping from the Cheese Melter to the range was ordered, connect the gas line now (as described in Step 3), before attaching the wall shield.
5.Attach the wall shield, which forms the rear of the flue riser. The gas supply inlet extending out from the rear of the Cheese Melter should be accessible through the corresponding hole on the back of the flue riser.
6.Go on to Step 3.
Figure 4
Mounting of Infrared Cheese Melter on Flue-Riser
INSTALLATION AND OPERATION MANUAL 1186533 REV 1 (02/06) | PAGE 13 OF 28 |