SERVICING INSTRUCTIONS (continued)

PROCEDURE: Delime the Water Tank

PRECAUTIONS: Disconnect brewer from electric power.

 

Allow brewer to cool.

FREQUENCY:

As required (Brewer slow to heat)

TOOLS:

Deliming Solution

 

Protective Gloves, Goggles & Apron

 

Mild Detergent, Clean Soft Cloth or Sponge

 

Bristle Brush, Bottle Brush

 

Large Sink (or other appropriate work area)

1.Disconnect brewer from electric power. Turn off the water shut-off valve and disconnect the water supply line from the brewer inlet fitting.

2.Remove the tank lid assembly as described on page 15.

3.Remove the water tank from the brewer body by lifting straight up. Empty all water from the tank. Set the tank back into the brewer.

4.Mix 2 quarts of deliming solution according to the manufacturer’s directions. Carefully pour the deliming solution into the water tank. Lower the lid assembly back onto the tank. Allow to sit for 30 minutes, or as directed by the manufacturer.

5.At end of soaking period, remove lid assembly from tank. Thoroughly rinse internal components of lid assembly with clear water. Using a stiff bristle brush, scrub the heating element (and faucet water coil on automatic brewers) to remove lime and calcium build-up. Rinse with clean water. Store lid assembly in a safe location .

6.Remove the tank from the brewer and empty. Using a stiff bristle brush, scrub the interior of the water tank to remove lime and calcium build-up. Rinse with clean water.

7.Set the tank back into the brewer. Reassemble the tank lid to the water tank. Make sure the gasket is properly in place, then reinstall the hold-down strap.

8.Reinstall wiring to heating element and thermostat. Reinstall the hi-limit thermostat (if removed). For automatic brewers, reassemble piping for the faucet. Verify that all internal components are dry, then reinstall the top panel.

10.Reconnect brewer to electrical supply and, for automatic brewers, reconnect water supply.

11.Run at least ten full brew cycles without pods, and discard all water generated.

12.Brewer is ready to use.

CAUTION:

CHEMICAL BURN

HAZARD

Deliming chemicals may be caustic. Wear appropriate protective gloves and goggles during this procedure.

Never siphon deliming chemicals or solutions by

mouth.

This operation should only be performed by qualified and experienced service personnel.

IMPORTANT: DO NOT spill, splash or pour water or deliming solution into or over any internal component other than the inside of the water tank.

IMPORTANT: DO NOT allow any internal components to come into contact with the deliming solution. Take care to keep all internal components dry.

NOTE: Repeat steps 4 thru 5 as required to remove all scale and lime build-up.

NOTE: Normally, silicone hoses do not need to be delimed. Should deliming hoses become necessary, Bloomfield recommends replacing the hoses.

19

Page 20 Page 22
Page 21
Image 21
Bloomfield 9600 Single Cup owner manual Procedure Delime the Water Tank, Chemical Burn Hazard
Page 20 Page 22

9600 Single Cup specifications

The Bloomfield 9600 Single Cup Brewer is a standout in the realm of coffee brewing technology, designed for both commercial and home use. This machine is ideal for those who appreciate a fresh, flavorful cup of coffee without the hassle of brewing a full pot. With its advanced features and user-friendly design, the 9600 integrates convenience and quality seamlessly.

One of the key highlights of the Bloomfield 9600 is its single-cup brewing capability. This allows users to enjoy freshly brewed coffee anytime without a prolonged wait. Ideal for small offices, cafes, or home kitchens, the brewer eliminates the worry of waste, as it brews just the right amount for immediate consumption. Furthermore, the intuitive controls make it easy for anyone to operate, regardless of their technical expertise.

The 9600 employs a unique brewing technology that ensures consistent temperature and extraction time, resulting in a rich and aromatic brew. Its precision brewing system guarantees that water is heated to the optimal temperature for coffee extraction, which is crucial in bringing out the coffee's full flavor profile. Additionally, this machine features programmable brewing cycles, allowing users to customize strength and flavor according to their preferences.

The design of the Bloomfield 9600 also emphasizes user convenience. With a compact footprint, it easily fits on countertops without taking up too much space. An integrated water reservoir minimizes refilling frequency, while its easy-to-clean components ensure maintenance is straightforward and hassle-free.

Energy efficiency is another significant characteristic of the 9600. The machine is equipped with an automatic shut-off feature, conserving energy when it’s not in use. This is particularly beneficial in commercial settings, where energy costs can add up over time.

Overall, the Bloomfield 9600 Single Cup Brewer is an exemplary choice for coffee lovers seeking quality and convenience in one package. With its high-end brewing technology, ease of use, and energy-efficient design, this machine is poised to elevate the coffee experience for users while fitting seamlessly into a modern lifestyle. Whether for personal use or in a professional setting, the Bloomfield 9600 promises to deliver exceptional coffee with every cup.
Top Page Image Contents