AutoDome 700 Series IP PTZ Camera | Using the AutoDome 700 Series en 13 |
|
|
Watermarking flag set on media item
Motion flag set on media item
Discovery of storage not completed. If the information about recorded video is not cached, a discovery procedure is started in order find all recorded video. During this time, the “discovery” symbol is shown. While discovery is executed, gaps might be shown in places which the discovery has not yet reached. The gap will automatically be replaced by the true video, as soon as the correct information is available.
Maximum Number of Connections
If you do not connect, the unit may have reached its maximum number of connections. Depending on the unit and network configuration, each AutoDome 700 Series can have up to 25 Web browser connections or up to 50 connections via the Bosch Video Management System.
Protected AutoDome 700 Series
If the AutoDome 700 Series is password protected against unauthorized access, the Web browser displays a corresponding message and prompts you to enter the password when you attempt to access protected areas.
NOTICE!
An AutoDome 700 Series offers the option to limit the extent of access using various authorization levels (see the AutoDome 700 Series online help).
1.Enter the user name and associated password in the corresponding text fields.
2.Click OK. If the password is entered correctly, the Web browser displays the page that was called up.
Protected Network
If a RADIUS server is employed in the network for managing access rights (802.1x authentication), the AutoDome 700 Series must be configured accordingly, otherwise no communication is possible.
Image Selection
You can view the image of the camera in different displays.
Click one of the tabs Stream 1, Stream 2, or
View Control
The View Control tab allows you to control camera functions (pan, tilt, zoom, focus, and iris), navigate through
Bosch Security Systems, Inc. | User Manual | F.01U.273.798 3.0 2012.08 |
