Bosch Appliances 700 Basic Mode System Overview, Advanced Mode General, Identification, Password

AutoDome 700 Series IP PTZ CameraConfiguring the AutoDome 700 Series en 27

Storage medium

1. Select the required storage medium from the list.

2. Click the Start button to start the recording immediately.

4.7	Basic Mode: System Overview
	The data on this page are for information purposes only and cannot be changed. Keep a
	record of this information in case technical assistance is required.
	NOTICE!
	You can select all required text on this page with the mouse and copy it to the clipboard with
	the [Ctrl]+[C] key combination, for example if you want to send it via e-mail.

4.8	Advanced Mode: General
4.9	Identification
	Device ID

Each AutoDome 700 Series should be assigned a unique identifier that you can enter here as an additional means of identification.

Device Name

The camera name makes it easier to identify the remote camera location, in the event of an alarm for example. It will be displayed in the video screen if configured to do so. The camera name makes the task of administering cameras in larger video monitoring systems easier, for example using the VIDOS or Bosch Video Management System programs.

Enter a unique, unambiguous name for the camera in this field. You can use both lines for this.

CAUTION!

Do not use any special characters, for example &, in the name.

Special characters are not supported by the system's internal recording management and may therefore result in the Player or Archive Player being unable to play back the recording.

You can use the second line for entering additional characters; these can be selected from a table.

1.Click the icon next to the second line. A new window with the character map is opened.

2.Click the required character. The character is inserted into the Result field.

3.In the character map, click the << and >> icons to move between the different pages of the table, or select a page from the list field.

4.Click the < icon to the right of the Result field to delete the last character, or click the X icon to delete all characters.

5.Now click the OK button to apply the selected characters to the second line of the Camera 1 parameters. The window will close.

Initiator extension

You can attach your own text to the initiator name of the AutoDome 700 Series to make the unit easier to identify in large iSCSI systems. This text is added to the initiator name, separated from it by a full stop. You can see the initiator name in the System Overview page.

4.10Password

An AutoDome 700 Series is generally protected by a password to prevent unauthorized access to the unit. You can use different authorization levels to limit access.

Bosch Security Systems, Inc. User Manual F.01U.273.798 3.0 2012.08