Bosch Appliances 700 user manual Lens Settings

Models: 700

1 82
Download 82 pages 123 b
Page 39
Image 39

AutoDome 700 Series IP PTZ Camera

Configuring the AutoDome 700 Series en 39

 

 

Auto (default): The camera switches out of Night Mode after the ambient light level reaches a pre-defined threshold.

Night Mode Threshold

Adjusts the level of light at which the camera automatically switches out of night mode (B/W) operation. Select a value between 10 and 55 (in increments of 5), where 10 is earlier and 55 is later.

Noise Reduction

Turns on the 2D and 3D noise reduction feature.

Noise Reduction Level

Adjusts the noise level to the appropriate level for shooting conditions. Select a value between 1 and 5.

4.23Lens Settings

Auto Focus

Continuously adjusts the lens automatically to the correct focus for the sharpest picture.

One Push (default): activates the Auto Focus feature after the camera stops moving. Once focused, Auto Focus is inactive until the camera is moved again.

Auto Focus: Auto Focus is always active.

Manual: Auto Focus is inactive.

Focus Polarity

Normal (default): focus controls operate normally.

Reverse: focus controls are reversed.

Focus Speed

Controls how fast the Auto focus will readjust when the focus becomes blurred. Select from the following options:

Super Slow

Slow (default)

Medium

Fast

Auto Iris

Automatically adjusts the lens to allow the correct illumination of the camera sensor. This type of lens is recommended for use where there are low light or changing light conditions.

Constant (default): camera constantly adjusts to varying light conditions (default). If you select this option, the AutoDome makes the following changes automatically:

Gain Control: switches to AGC.

Shutter Speed: switches to default.

Manual: camera must be manually adjusted to compensate for varying light conditions.

Iris Polarity

Capability to reverse the operation of the iris button on the controller.

Normal (default): iris controls operate normally.

Reverse: iris controls are reversed.

Auto Iris Level

Increases or decreases brightness according to the amount of light. Type a value between 1 and 15, inclusive. The default setting is 5.

Bosch Security Systems, Inc.

User Manual

F.01U.273.798 3.0 2012.08

Page 39
Image 39
Bosch Appliances 700 user manual Lens Settings