Connection with a remote station
Looking at live images, performing control procedures on a remote station
You are now on the live image
Establish | From the Connection menu, select the |
connection | Connection command. |
| The Connection dialog box opens. |
| Select the desired connection type, e.g. |
| ISDN/network. |
| Click on the remote station in the list box and |
| confirm with OK. |
| The connection to the remote station is |
| established. |
Select | In the image window, on the icons for the |
camera | individual cameras to see their images. On the |
| Display menu, you can display several cameras |
| per remote station simultaneously. |
| From the Camera menu, select the Camera |
| switchover command. |
| The Automatic camera switchover dialog box |
| opens. |
| In the dialog box, specify the cameras that should |
| be affected by the switchover. If necessary, |
| consult the online Help. |
Control | From the Relay menu, select the Relay... |
relay | command. The relay output is controlled (e.g. light |
outputs | on). Clicking the command again will reset the |
| control procedure. |
Disconnect | On the Connect menu, click the Disconnect |
| command and confirm the query as to whether you |
| really want to disconnect with Yes. |
BOSCH Security Systems GmbH | – 25 – | A1 02.03 |
