Bosch Appliances DIE 165 R manual Connecting a l 6” exhaust-air pipe, Prior to installation

Prior to installation

For optimum extractor hood efficiency:

❑Short, smooth air exhaust pipe.

❑As few bends in the pipe as possible.

❑Diameter of pipe to be as large as possible and no tight bends in pipe.

If long, rough exhaust-air pipes, many pipe bends or smaller pipe diameters are used, the air extraction rate will no longer be at an optimum level and there will be an increase in noise.

IMPORTANT:

The manufacturer of the extractor hoods accepts no liability for complaints which can be attributed to the design and layout of the pipework.

❑Round pipes: We recommend Internal diameter: 6”.

❑Flat ducts must have an internal cross- section that equates to that of round pipes.

There should be no sharp bends. l 6” approx. 28,3 inches2

❑If pipes have different diameters: Insert sealing strip.

❑For exhaust-air mode, ensure that there is an adequate supply of fresh air.

Connecting a l 6” exhaust-air pipe:

❑Mount the pipe

directly onto the air outlet on the hood.

12