Cleaning and care
Isolate the extractor hood by pulling out the mains plug or switching off the fuse.
NOTE:
Do not clean the extractor hood with abrasive sponges or with cleaning agents which contain sand, soda, acid or chlorine!
❑Clean the extractor hood with a hot soap solution or a mild window cleaner.
❑Do not scrape off
❑When cleaning the grease filters, remove grease deposits from accessible parts of the housing. This prevents the risk of fire and ensures that the extractor hood continues operating at maximum efficiency.
Screen and control buttons:
Clean with a mild detergent solution and a soft, damp cloth only.
Do not use stainless steel cleaners.
Stainless steel surfaces:
❑Use a mild
❑Clean the surface in the same direction as it has been ground and polished.
❑We recommend our stainless steel cleaner no. 461731.
See enclosed service booklet for order address.
Aluminium, coated and plastic surfaces:
❑Do not use dry cloths.
❑Use a mild window cleaning agent.
❑Do not use aggressive, acidic or caustic cleaners.
Observe the warranty regulations in the enclosed service booklet.
8
