![](/images/new-backgrounds/1072755/7275585x1.webp)
Assembly Instructions
For the installer and kitchen expert!
Important installation notes
The connection diagramm is located on the rear panel of the appliance.
L | N | |
|
|
Properly dispose of packaging materials.
Do not use oven door handle for transporting or handling the unit during installation.
WARNING: Connection and first start of the appliance may only be performed by an authorised specialist.
Connection have to be made using a mains connection cable not lighter than
300 V / 500 V Rubber Flexible Cable or
Rated consumption, rated voltage and type no. of the appliance:
See appliance nameplate behind the oven door to the left beneath the side edge of the oven.
The unit's nameplate is located at on the sidewall of the unit.
Electrical safety of the appliance can be ensured only if the equipment earth in the building installation has been installed according to regulations.
A separator must be installed in the household circuit. A suitable separator is a switch that has a contact gap of more than 3 mm and interrupts all poles. Other examples are LS switches, fuses and contactors.
In the case of repairs interrupt all power connections to the unit.
The properly installed appliance must be covered on all sides in such a fashion that not even components with rough insulation are exposed to the touch.
The cover must be removable with tools only.
43