en
10 KTS 340 Commissioning
9.Disconnect the USB link to the KTS 340.
??The following message then appears with WIN 7:
Windows can't verify the publisher of this driver software.
10.Confirm the message with "Install this driver soft- ware anyway".
11.Switch on the KTS 340.
iiThe KTS 340 always starts up in English (US) when first switched on. The language can be changed
under "
(Service) >> User setting >> Language setting".
iiThe ESI[tronic] Startcenter installation routine au- tomatically installs the USB driver to permit commu- nication between the KTS 340 and the PC/laptop. The "Connect USB" dialog box does not appear if the USB driver was already installed during an earlier installation of Startcenter (e.g. with KTS 200).
??The following message appears with WIN XP:
This wizard helps you install soft- ware for: KTS-embedded.
?? The following message appears with WIN Vista:
Windows needs to install driver software for your KTS embedded.
12.Close the message with "Cancel".
?? The following message then appears with WIN Vista and WIN 7: Windows can't verify the publisher of this driver soft- ware.
13.Confirm the message with "Install this driver soft- ware anyway".
14.To successfully conclude installation, restart the
PC/laptop.
?? ESI[tronic] Startcenter has been installed.
1 689 989 072 | Robert Bosch LLC |
