IP Camera 200 Series | Advanced Mode en 115 |
|
|
RTSP port
If necessary, select a different port for the exchange of the RTSP data from the list. The standard RTSP port is 554. Select Off to deactivate the RTSP function.
UPnP
Select On to activate UPnP communication. Select Off to deactivate it.
When UPnP is activated the camera reacts to requests from the network and is registered automatically as a new network device on the inquiring computers.
Note:
To use the UPnP function on a computer with Windows XP or Windows Vista, the Universal Plug and Play Device Host and the SSDP Discovery services must be activated
This function should not be used in large installations due to the large number of registration notifications.
TCP metadata input
The device can receive data from an external TCP sender, for example an ATM or POS device, and store it as metadata. Select the port for TCP communication. Select Off to deactivate the function. Enter a valid Sender IP address.
6.8.3WLAN
To use a wireless LAN connection proceed as follows:
1.To activate the wireless LAN connection select Auto from the drop down box.
2.Select your region in the Region code drop down box.
3.If you know the service set identifier enter it in the SSID box. If you do not know, click Scan to see a list of available services and then click a service.
4.Enter the encryption key to get access to the network in
the PSK box. Reboot and remove Ethernet cable immediately.
Note:
To enhance network security, only
Bosch Security Systems | Installation and Operation Manual |
