82 en Advanced Mode | IP Camera 200 Series |
| |
Note:
The M-JPEG resolution follows the highest resolution setting of either stream 1 or stream 2. For example, if stream 1 is VGA and stream 2 is QVGA, the JPEG resolution will be VGA. The M-JPEG frame rate varies depending on system loading.
6.4.4Audio
Select the microphone or line-in connector as the Audio input or switch it off. Adjust the Input volume with the slider. Switch the Audio output On or Off.
Select G.711 or L16 as the audio Recording format. The default value is G.711. Select L16 if you want better audio quality with higher sampling rates. This requires approximately eight times the G.711 bandwith.
AR18-10-B012 v1.54 2011.08 Installation and Operation Manual | Bosch Security Systems |
