140 en Troubleshooting | IP Camera 200 Series |
|
|
8Troubleshooting
8.1LED indicators
The camera has LEDs on the front and the rear panel that show the operating status and can indicate possible malfunctions.
Power LED
Does not light up: Camera is switched off.
Lights red: Startup in progress.
Lights green: Camera is switched on.
Flashes green: Video connection established.
Flashes red: Camera is faulty, for example, following failed firmware upload.
8.2Resolving problems
The following table is intended to help identify the causes of malfunctions and correct them when possible.
Malfunction | Possible causes | Solution |
|
|
|
No image | Faulty cable connections. | Check all cables, plugs, |
transmission to |
| contacts and |
remote location. |
| connections. |
|
| Check the iris setting. |
|
|
|
No connection | The unit's configuration. | Check all configuration |
established, no |
| parameters. |
image transmission. |
|
|
Faulty installation. | Check all cables, plugs, | |
|
| contacts and |
|
| connections. |
|
|
|
8.3Customer service
If a fault cannot be resolved, please contact your supplier or system integrator, or contact Bosch Security Systems Customer Service directly.
The Installer should write down all information regarding the unit so that it can be referenced for warranty or repair. The
Bosch Security Systems |
