Sealed Burners

Your new cooktop has sealed gas burners. There are no burner parts under the

 

cooktop to clean, disassemble or adjust. Your cooktop has two different burner

 

cap sizes, large and medium. Match the pan to the size burner.

Burner Caps

The burner cap is porcelainized steel. On the underside of the cap is one locator

 

which must fit into the corresponding notch on the burner base. If the burner cap

 

is not placed correctly, the burner may not light or the flame may not burn com-

 

pletely or correctly.

 

Figure 2 - Burner Cap

Porcelain

Enamel Cap

BURNER CAP

 

Ports

 

Locator

 

Igniter

 

Notch

 

BURNER BASE

 

WARNING: To prevent flare-ups do not use the cooktop without all

 

burner caps and all burner grates properly positioned.

Burner Grates

The position of each double grate is labeled on the underside edge of the grate as

 

shown in the figure below.

 

Figure 3 - Burner Grates

Single - 36” models only

Universal -

Side

Center

30” models

 

 

only

 

 

30" (76cm) Models have two universal grates. Position the straight side in the cen- ter. They are interchangeable by rotating 180°.

36" (91cm) Models have one side grate, one center grate and one single grate. Position the grates on the cooktop as illustrated above.

English 4