WARNING: To prevent flare-ups all grates must be properly posi-

 

tioned on the cooktop whenever the cooktop is in use. Each of the four

 

feet must be placed into the corresponding dimples in the cooktop. Do

 

not use a grate if the rubber feet are missing or damaged.

Burner Control Knobs

The standard burner controls have an infinite number of heat settings with no

 

fixed positions.

 

Figure 4 - Burner Control Knob

 

 

 

OFF

 

 

 

 

HI

 

 

 

 

 

 

LO

To operate: Select the appropriate control knob, push down and turn counterclockwise to the desired flame size. Turn OFF by turning the control knob clockwise to OFF.

A rubber grommet is located under each control knob.

To remove knob and grommet: With burner in the OFF position, gently lift knob up and off. Gently pull grommet toward center and lift out.

WARNING: To avoid electric shock, do not reach through opening into rough-in box.

To replace grommet and knob: Replace grommet by placing center groove around cooktop. The rubber grommet should be firmly attached around the cook- top opening. Place the control knob indicator line at the OFF position; press down firmly.

Using the Cooktop

Before Using the Cooktop for the First Time

Remove all packing materials and literature from the cooktop surface.

While cool, wipe with a clean, damp sponge and dry.

There may be a slight odor during the first several uses; this is normal and will disappear.

Optimum cooking results depend on the proper cookware being selected and used. (See Proper Cookware.)

Read all safety precautions and Use and Care Manual information prior to operating.

English 5