Application Note

Bosch Sensortec

BlueBox Demo-Board for the digital sensors AN18002

SMB365 (acceleration) and SMD500 (pressure)

Installation and use of the BOSCH Sensortec

multi sensor, wireless Demo-Board

BlueBox V1.0

ABSTRACT

Based on the experience of 500 million MEMS sensors and testing to highest quality standards, BOSCH Sensortec has developed a sensor family, consisting out of pressure- and acceleration sensors with best-of-the-market performance and outstanding reliability. Both the SMB365 acceleration sensor and the SMD500 pressure sensor are specifically designed for digital low-power applications to enhance functionality in consumer electronic devices as well as in health, logistics and security systems. These sensors are available in small and thin standard packages (QFN 4x4 mm² for acceleration and LCC8 5x5 mm² for pressure) to fit even into the smallest, state-of-the-art devices.

This application note shows how to set up and how to install the SensorDesktop software and the BlueBox hardware for functionality demonstration and some minor evaluation purposes or application examples of the SMB365 and the SMD500 sensor. The proper use and some general functions, e.g. wireless operation of the BlueBox Demo-Board, are also described. For specific product evaluation refer to the BOSCH Sensortec Evaluation Board which is especially designed for application engineering or extensive testing purposes.

Discover more innovative perspectives for Life Sience and consumer applications:

www.bosch-sensortec.com

Rev. 1.0

Page 1

© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such copying and passing onto third parties.

7211RB11